MotorsTV,Trace,Sailing Chan, Mezzo,France2-5 per vplug + dbox2 hell (Astra 19,2E)

Dieses Thema im Forum "Audio & Video Tutorials" wurde erstellt von SelfConquest, 8. Oktober 2008 .

Schlagworte:
Status des Themas:
Es sind keine weiteren Antworten möglich.
  1. 8. Oktober 2008
    Zuletzt von einem Moderator bearbeitet: 15. April 2017
    C+NL (Astra), Nova (Hotbird) Fausto + dbox2/dream - hell (Update 19.4.2010)

    Achtung C+NL auf Astra und Nova auf Hotbird offen per "Fausto Methode"
    siehe hier Sky / Premiere: Cardsharing, Keys... - Seite 2 - RR:Board (stand 19.04.2010)

    ----------------------------------------------------------------------------------Ab hier alles down zur Zeit----------------------------------------

    Hallo, dies ist sicher ein recht spezielles Tut. Es richtet sich an alle dbox 2 user die außer dem Orf (down seit 16.03.09) noch etwas mehr sehen wollen. Das wären auf Astra 19,2 E die 4 Kanäle aus dem Canal Digitaal + Paket, Motors TV,Trace TV, Sailing Channel und Mezzo (alle Seca 2 verschlüsselt). Seit der vplug version 2.3.8 "erhellt" sich noch mehr. Das wären:
    TV Vlaanderen (006c) auf Astra: TRACE TV, Sailing Channel, Mezzo, Motors TV, France 2,3,4 und 5
    NC Numericable (0084) auf Hotbird: W9, Boomerang, Tele Melody und Berbere Television


    letztes Update: 25.05.09 (keys -> siehe 5.)

    1. man besorgt sich dieses Paket :

    https://www.xup.in/dl,18323812/canal_digitaal_cyfra_sbcl_vplug.zip/

    2. Anleitung:
    Dbox und PC per Netzwerkkabel verbunden (cross over).
    Paket entpaken und SBCL starten.
    Danach wechselt ihr zum Unterpunkt "Tuner"

    Wichtig ist in der oberen Hälfte: Port, Client-IP und
    Protocol.

    Den Port könnt ihr beliebig einstellen.
    Default Port: 6001
    Die Client- IP ist eure Box IP; zb 192.168.99.252.

    Das Protocol ist: Newcamd

    Haken bei Autostart und Debug setzen.

    Die Einstellungen SBCL x2 unten könnt ihr vergessen.

    Danach geht ihr ganz oben auf vPlug und setzt den Haken auf "Aktive".

    Dann stopt ihr den Server SBCL und startet ihn wieder.


    3. DBOX Einstellungen: (je nachdem welchen Emu ihr verwendet)


    MGcam
    Die Datei mg_cfg (in /var/keys/) folgendermaßen anpassen:

    Code:
    # EMM messages
    # 00 don't show any EMMs (default)
    # 01 show only valid EMMs
    # 02 show valid and bad EMMs with complete data display
    M: { 01 }
    
    # ECM messages
    # 00 don't show any ECMs
    # 01 show only valid ECMs (default)
    # 02 show valid and bad ECMs with complete data display
    C: { 01 }
    
    # AU
    # 00 disable
    # 01 enable
    # 02 Auto
    # 03 network cards update only
    A: { 01 }
    
    # key update (sum 01 or 02 with 04)
    # 01 update only new keys, default setting
    # 02 update all keys (used for valid PMK checking)
    # 04 replace (not add) http-aes keys, only first key replaced !
    U: { 04 }
    
    # config files folder (softcam, autoroll, ignore/priority)
    # 00 files in /var/keys
    # 01 files in /tmp
    T: { 00 }
    
    # network mode, use summ for several clients
    # 00 no network (default)
    # 01 newcamd netclient
    # 02 radegast netclient
    # 04 camd3 netclient
    G: { 01 }
    
    # network retry, use summ for several options
    # 00 disable
    # 01 retry every new ecm
    # 02 try to connect to offline shares every Q: seconds
    # 04 try to detect and fast reconnect to lost (and not used atm) server
    N: { 04 }
    
    # network ecm timeout in seconds
    K: { 05 }
    
    # newcamd dead routes connect retry, sec
    Q: { 600 }
    
    # network shares priority
    # 00 newcamd, radegast, camd3 (default)
    # 01 camd3, radegast, newcamd
    # 02 newcamd, camd3, radegast
    P: { 00 }
    
    # on screen display type
    # 00 No OSD (default)
    # 01 neutrino
    # 02 enigma
    # 03 relook
    # + user password for http auth
    O: { 00 } username password
    
    # on screen display Options, summ of:
    # 01 show emu ecm
    # 02 show network shares messages
    # 04 show decoding failed / fta
    # 08 show emm keys update
    # + web port to use for osd
    S: { 03 } 80
    
    # Log option, summ of:
    # 00 Off
    # 01 Network
    # 02 console
    # 04 file, appended ! delete it by yourself, before it eat all your hdd
    # + IP udp-port log-file-name
    L: { 00 }
    
    # keep ecm cache, seconds
    E: { 15 }
    
    # cache option, summ of:
    # 00 Off (default)
    # 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
    # 02 Ecm data cache, remember CW for (E: ) time
    # 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
    H: { 07 }
    
    # reread files, summ of:
    # 00 No (default)
    # 01 reread config file on channel change (including priority and ignore, but not replace/cache)
    # 02 reread SoftCam.Key on channel change
    # 04 reread SoftCam.Key if file changed
    R: { 00 }
    
    # debug, summ of
    # 00 off (default)
    # 01 debug ecm
    # 02 debug emm
    # 04 debug network ecm
    # 08 debug network emm
    # 16 debug network login
    # 32 show mem/cpu stats every 1 min
    # 64 add timestamp to log messages
    D: { 00 }
    
    # box type
    # 00 autodetect, change only if you think wrong type detected.
    # 01 dbox2
    # 02 dreambox
    # 03 triple-dragon
    # 04 relook
    # 05 openbox
    B: { 00 }
    
    
    # urls for aes keys update, any number or urls allowed,
    # url data must contain key in format 0500:007C00:0000000000:00:key1:keyl
    # W: { http://some.host.com/keys.php }


    Camd3

    Code:
    SLOT=PC-IP:4:1:1:1:6001:test:test:01020304050607080910111213 14
    in der camd3.config eintragen (für PC-IP logischerweise die IP eures Rechners in der Form 192:168:xxx:xxx)
    und im SBCL, auch lediglich nur die Client-IP (BOX-IP) angeben.


    CCcAM

    Folgenden Eintrag (je nach Image) in /var/etc/CCcam.cfg machen:

    Code:
    N: 192.168.99.130 6001 test test 01 02 03 04 05 06 07 08 09 10 11 12 13 14
    Natürlich die IP für euren rechner Eintragen



    4. Newcamd.config (wichtig für Mgcamd)


    Nun müssen wir noch auf der Box eine Datei für den newcamd-Server erstellen.

    Dazu benutzt Ihr folgenden Code:

    Code:
    # /var/tuxbox/config/newcamd/newcamd.conf
    #
    # newcamd mandatory settings
    #
    # Use emulator?
    EMU = yes
    # if both control word server and emulator keys are available for the
    # channel, which method should be tried first?
    PREFER_EMU = yes
    # Autoupdate for Emu and Control Word Servers
    # AU is always yes if there are betad UDS control word server
    # connected to newcamd
    AU = yes
    #
    # OSD
    #
    # number of seconds to show the newcamd OSD, works on enigma only
    # 0 seconds -> OSD off
    # 1 second -> show "Can't decode" messages only
    OSD_TIMEOUT = 0
    # Recent Enigma versions come with a new option "Use http authentication"
    # in the Expert Setup menu. If this option is enabled, the Enigma web server
    # requires all clients to authorize themselves with username (root) and
    # password (usually dbox2 or dreambox). The following option tells newcamd
    # about the authentication username and password to use for the web server
    # in order to be able to display its on screen information.
    OSD_WEB_LOGIN = root:dreambox
    #
    # newcamd debug options
    #
    # dumps all ca systems used by a channel on the console
    SHOW_ALL_CA_SYSTEMS = no
    # print debug messages about ECM handling
    DEBUG_ECM = yes
    # print debug messages about EMM handling
    DEBUG_EMM = no
    # print debug messages about Control Word Server (CWS)
    DEBUG_CWS = no
    # print debug messages about dbox2 CAM (cam-alpha.bin)
    DEBUG_CAM = no
    # hex dump of entire PAT
    SHOW_PAT = no
    # hex dump of entire PMT
    SHOW_PMT = no
    # hex dump of entire ECM
    SHOW_ECM = no
    # hex dump of entire CAT
    SHOW_CAT = no
    # hex dump of entire EMM (AU)
    SHOW_EMM = no
    # show network ECM messages being sent and received from/to the cardservers
    SHOW_CWS_ECM = no
    # show network EMM messages being sent and received from/to the cardservers
    SHOW_CWS_EMM = no
    # hex dump of EMMs with wrong signature
    EMM_REPORT_WRONG_SIG = no
    #
    # newcamd optional settings
    #
    # Delay between reception of new control word and writing them into
    # the CSA registers
    # this is a default, can be changed for each individual key in keylist
    DEFAULT_CW_DELAY = 0
    # reload config on every channel zap
    RELOAD_CONFIG_ON_ZAP = no
    # reload keylist on every channel zap
    RELOAD_KEYLIST_ON_ZAP = no
    # write osd ca info to file
    CA_INFO_FILE = /tmp/cainfo.txt
    #
    # newcamd mandatory settings for control word servers (cws)
    #
    # Cardserver list
    #
    # <hostname> <port> <username> <password> <14 byte triple-des key in hex> <lan/wan> <cardserver name> [noecm]
    #
    # wan connections will be dropped and rebuild if newcamd is told so by camdcmd
    # (see admin options)
    #
    # If the last word in the CWS line is noecm, newcamd will not attempt to send
    # any ecms to that card, it will only send EMMs (AU) if userid is 1. Useful if
    # you want to merge several cards of one provider into one port using
    # cardspider.
    #
    # hostname = uds to use betad, port is the serial port in that case
    #
    # CWS = uds 1 dummy dummy
    # CWS = linux.domain.com 10000 dummy2 dummy2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
    # CWS = 127.0.0.1 10000 dummy3 dummy3 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
    #CWS = uds 0 local local
    #CWS = 127.0.0.1 10001 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
    [B]CWS = 192.168.0.100 6001[/B] test test 01 02 03 04 05 06 07 08 09 10 11 12 13 14
    
    #
    # newcamd optional settings for using control word servers (cws)
    #
    # Timeout for cardserver login in 100ms
    CWS_CONNECT_TIMEOUT = 20
    # Port to listen for incoming cardserver connections (reverse login)
    # and/or admin connections
    CWS_INCOMING_PORT = 12000
    # Port to get a list of all connected cardservers, just telnet to it
    CWS_DEBUG_PORT = 12001
    # send keep alive messages to servers to keep connections from dying by
    # unreasonable router NAT timeouts, make sure all cardservers/spiders you
    # conntect to are v5.25 or newer, otherwise you'll loose connection to them,
    # if set to yes
    # seems this feature is commonly misunderstood, it only keeps connections
    # open even if no data packets are using it for while (NAT routers tend to
    # forget about established tcp connections when they are inactive), it is
    # NOT to automatically reconnect to servers, see also Q&A in readme.txt
    CWS_KEEPALIVE = no
    #
    # newcamd admin control options
    # (incoming port is the same as CWS_INCOMING_PORT)
    #
    # <password> <14 byte des key>
    #
    ADMIN_PASSWORD = test 00 00 00 00 00 00 00 00 00 00 00 00 00 00


    Bitte passt die IP-Adresse (siehe Markierung) entsprechend an - hier muss die IP des PCs, auf dem SBCL läuft, rein!


    Das Ganze speichert Ihr dann mit einem Linux-konformen Editor (wie UltraEdit) auf die Box, Dateiname: newcamd.conf


    Pfad: /var/tuxbox/config/newcamd.conf

    5. Keys
    Beinhaltet nur die Keys für Provider 006A. 006C, 0084 und muß in das Verzeichnis SBCL/Plugins kopiert werden.
    Keys für MAi 2009 OK
    Keys für Juni 2009 OK

    No File | xup.in

    Nun noch die Camd resetten

    getestet mit mgcam, funzt 100%

    Update

    Mit der aktuellen vplug version 2.3.8. ist es möglich auch zusätzlich die Kanäle France 2-5 (TV-Vlaanderen Paket) hell zu kriegen. Anleitung wie oben beschrieben.
    Dazu benutzt ihr dieses All-In-One Paket:

    No File | xup.in

    Bei Fragen PN schicken

    screens:

    Bild

    Bild
     
  2. Video Script

    Videos zum Themenbereich

    * gefundene Videos auf YouTube, anhand der Überschrift.